Fastite Fittings Fastite

30"–54" Fastite Plugs

Standard Fastite plugs, sizes 30"–54", are satisfactory for tapping up through 2" NPT. For larger taps, plugs are furnished with a special boss, when specified. Except as noted below, taps are furnished only when specified.

Steel eyebolts with 1" or 1 1⁄2" NPT male pipe threads can be obtained from AMERICAN to be threaded into these standard tapped holes to aid in non-destructive plug removal (pulling or jacking) operations.

Please note that Fast-Grip gaskets should not be used with Fastite plugs if disassembly would ever be required.

Size
(in.)		 Pressure
Rating1
(psi)		 T
(in.)		 Weight (lbs.)
Fastite or
Push-On
24 250 1.16 350
30 250 1.37 565
36 250 1.58 785
42 250 1.78 1355
48 250 1.96 1670
54 250 2.16 2415
60 250 2.50 2680
64 250 2.75 3230

1 Higher pressure ratings are available on special applications. Consult AMERICAN.

Push-On Restrained Plugs

The Fastite restrained plug provides positive locking against joint separation and allows for future removal. This plug is also useful as a test plug. Neither Fastite conductive gaskets nor Fast-Grip gaskets should be used with Fastite restrained plugs.

If desired, a 2" NPT tap can be ordered in 6"–20" plugs. A 1" tap can be supplied in 4" plugs.

Size
(in.)		 Pressure Rating
(psi)		 Weight
(lbs.)
4 250 15
6 250 30
8 250 50
10 250 70
12 250 100
14 250 155
16 250 200
18 250 260
20 250 410

Request More Information

Add specific model info if applicable

Tell us more

Print Page