Fabricated Outlets

AMERICAN can furnish tangential welded-on outlets in certain diameters. Pipe with tangential outlets can often be positioned1 with the outlets on bottom for blowoffs or on top for air release. Tangential outlets with Fastite, Flex-Ring and mechanical joints can be furnished. Flanged and grooved joint tangentials are not available. Minimum pressure classes and location of tangential outlets are the same as for lateral welded-on outlets.

Parent and outlet pipe are normally furnished cement-lined in accordance with ANSI/AWWA C104/A21.4. Consult AMERICAN if other ends or linings, other than cement linings, are desired.

This is a shop-fabricated product and is not intended for field fabrication.

Parent
Pipe
Diameter
(in.)		 Outlet
Diameter
(in.)		 Minimum
Nominal
Thickness2
Parent/Outlet
Pipe (in.)		 Rated
Water
Working
Pressure
(psi)		 B
Minimum
Location
Outlet to
Parent Pipe
End
(in.)		 J
Standard
Dimension
Center to
Socket
(in.)
8 4 0.36/0.32 250 14 1/2 11 1/2
10 4 0.38/0.32 250 14 1/2 12 1/2
10 6 0.38/0.34 250 15 1/2 12 1/2
12 4 0.40/0.32 250 14 1/2 13 1/2
12 6 0.40/0.34 250 15 1/2 13 1/2
12 8 0.40/0.36 250 16 1/2 13 1/2
14 4 0.42/0.32 250 14 1/2 14
14 6 0.42/0.34 250 15 1/2 14 1/2
14 8 0.42/0.36 250 16 1/2 14 1/2
16 4 0.43/0.32 250 14 1/2 15
16 6 0.43/0.34 250 15 1/2 15 1/2
16 8 0.43/0.36 250 16 1/2 15 1/2
16 10 0.43/0.38 250 17 1/2 15 1/2
18 4 0.44/0.32 250 14 1/2 15 1/2
18 6 0.44/0.34 250 15 1/2 16 1/2
18 8 0.44/0.36 250 16 1/2 16 1/2
18 10 0.44/0.38 250 17 1/2 17
18 12 0.44/0.40 250 20 17
20 4 0.45/0.32 250 14 1/2 16
20 6 0.45/0.34 250 15 1/2 17
20 8 0.45/0.36 250 16 1/2 17 1/2
20 10 0.45/0.38 250 17 1/2 18
20 12 0.45/0.40 250 20 18
20 14 0.45/0.42 250 23 18
24 4 0.47/0.32 250 14 1/2 17
24 6 0.47/0.34 250 15 1/2 18 1/2
24 8 0.47/0.36 250 16 1/2 19 1/2
24 10 0.47/0.38 250 17 1/2 20
24 12 0.47/0.40 250 20 20
24 14 0.47/0.42 250 23 20
24 16 0.47/0.43 250 26 20
30 4 0.51/0.32 250 14 1/2 18 1/2
30 6 0.51/0.34 250 15 1/2 20 1/2
30 8 0.51/0.36 250 16 1/2 21 1/2
30 10 0.51/0.38 250 17 1/2 22 1/2
30 12 0.51/0.40 250 20 23
30 14 0.51/0.42 250 23 23 1/2
30 16 0.51/0.43 250 26 23 1/2
30 18 0.51/0.44 250 29 23 1/2
30 20 0.51/0.45 250 32 1/2 23 1/2
36 4 0.58/0.32 250 14 1/2 20
36 6 0.58/0.34 250 15 1/2 22
36 8 0.58/0.36 250 16 1/2 24
36 10 0.58/0.38 250 17 1/2 25
36 12 0.58/0.40 250 20 25 1/2
36 14 0.58/0.42 250 23 26 1/2
36 16 0.58/0.43 250 26 26 1/2
36 18 0.58/0.44 250 29 26 1/2
36 20 0.58/0.45 250 32 1/2 26 1/2
36 24 0.58/0.47 250 39 26 1/2
42 4 0.65/0.32 250 14 1/2 21 1/2
42 6 0.65/0.34 250 15 1/2 23 1/2
42 8 0.65/0.36 250 16 1/2 25 1/2
42 10 0.65/0.38 250 17 1/2 27
42 12 0.65/0.40 250 20 28
42 14 0.65/0.42 250 23 28 1/2
42 16 0.65/0.43 250 26 29
42 18 0.65/0.44 250 29 29 1/2
42 20 0.65/0.45 250 32 1/2 29 1/2
42 24 0.65/0.47 250 39 30
42 30 0.65/0.51 250 48 30
48 4 0.72/0.32 250 14 1/2 22 1/2
48 6 0.72/0.34 250 15 1/2 25
48 8 0.72/0.36 250 16 1/2 27
48 10 0.72/0.38 250 17 1/2 28 1/2
48 12 0.72/0.40 250 20 30
48 14 0.72/0.42 250 23 31
48 16 0.72/0.43 250 26 31 1/2
48 18 0.72/0.44 250 29 32
48 20 0.72/0.45 250 32 1/2 32 1/2
48 24 0.72/0.47 250 39 33
48 30 0.72/0.51 250 48 34
54 4 0.81/0.32 250 14 1/2 23 1/2
54 6 0.81/0.34 250 15 1/2 26
54 8 0.81/0.36 250 16 1/2 28 1/2
54 10 0.81/0.38 250 17 1/2 30
54 12 0.81/0.40 250 20 31 1/2
54 14 0.81/0.42 250 23 33
54 16 0.81/0.43 250 26 34
54 18 0.81/0.44 250 29 34 1/2
54 20 0.81/0.45 250 32 1/2 35 1/2
54 24 0.81/0.47 250 39 36
54 30 0.81/0.51 250 48 37 1/2
54 36 0.81/0.58 200 48 37 1/2
60 4 0.83/0.32 250 14 1/2 25
60 6 0.83/0.34 250 15 1/2 28
60 8 0.83/0.36 250 16 1/2 30 1/2
60 10 0.83/0.38 250 17 1/2 32
60 12 0.83/0.40 250 20 34
60 14 0.83/0.42 250 23 35
60 16 0.83/0.43 250 26 36
60 18 0.83/0.44 250 29 37
60 20 0.83/0.45 250 32 1/2 38
60 24 0.83/0.47 250 39 39
60 30 0.83/0.51 250 48 39 1/2
60 36 0.83/0.58 200 48 39 1/2
64 4 0.87/0.32 250 14 1/2 25 1/2
64 6 0.87/0.34 250 15 1/2 28 1/2
64 8 0.87/0.36 250 16 1/2 31
64 10 0.87/0.38 250 17 1/2 33
64 12 0.87/0.40 250 20 35
64 14 0.87/0.42 250 23 36 1/2
64 16 0.87/0.43 250 26 37 1/2
64 18 0.87/0.44 250 29 38 1/2
64 20 0.87/0.45 250 32 1/2 39 1/2
64 24 0.87/0.47 250 39 40 1/2
64 30 0.87/0.51 250 48 41 1/2
64 36 0.87/0.58 200 48 41 1/2

1 Do not attempt to lift or rotate outlet pipes by attaching to or exerting force on the outlet or any branch piping attached thereto. Likewise, don’t attach and suspend heavy piping items, etc., from outlet branch.

2 Nominal thickness of 4"–54" diameter parent pipe corresponds to special thickness class 53. Nominal thickness of 60" and 64" parent pipe corresponds to pressure class 350.

Request More Information

Add specific model info if applicable

Tell us more

Print Page